When a pattern instructs you to “draw yarn through the remaining stitches,” it is asking you to weave the yarn tail through your final live stitches. This will remove your stitches from the needles and will also keeping them from running. Using a darning needle (or blunt tapestry needle) to slip the stitches onto the yarn tail makes this bind off easier to complete. Once you have threaded the live stitches onto the yarn tail, pulling on the end brings the stitches together and closes the hole at the top of your work.
Below you will find both video and written guides to help you learn how to draw yarn through your remaining live stitches.
Video Guide: How to Draw Yarn Through Remaining Stitches
Written Guides: How to Draw Yarn Through Remaining Stitches
Draw Tail Thru Remaining Stitches, Step 1:
Measure the working yarn coming from your knitting and find a point that is roughly eight to ten inches away from your needles (or the length your pattern instructs). With sharp scissors, cut the working yarn at that point.
Draw Tail Thru Remaining Stitches, Step 2:
Thread the loose end through the eye of a darning needle.
Draw Tail Thru Remaining Stitches, Step 3:
Locate the next live stitch that would have been worked if you had continued knitting your pattern. Starting with this first live stitch, insert the tip of the darning needle into the front leg of the stitch from front to back.
Draw Tail Thru Remaining Stitches, Step 4:
Slip the stitch onto the darning needle (slip the stitch purlwise).
Draw Tail Thru Remaining Stitches, Step 5:
Continue slipping live stitches onto your darning needle until it fills up. Then, carefully pull the darning needle and yarn tail through the stitches.
Draw Tail Thru Remaining Stitches, Step 6:
In the same manner, slip all the remaining stitches onto the darning needle.
Draw Tail Thru Remaining Stitches, Step 7:
Thread the remaining stitches onto the yarn by pulling the darning needle through them.
Draw Tail Thru Remaining Stitches, Step 8:
Pull the yarn tail away from your work to secure the stitches; this will bring the stitches closer together and close the hole at the top of your work.
You will finish Simple Knit Beanie hats with the yarn tails as I’ve shown you in this lesson.
My Slouch Hat pattern is finished by weaving in the loose ends in the same manner.
Up Next
Next, let’s learn to make knitting increases. The “Make One” increases add stitches to your rows. Learning these stitches will allow you to shape the thumbs of gloves and more.
After knitting a hat in the round, you will want to take it off the needles, then weave in your loose ends. Instead of “bind off,” many knitting patterns worked in the round will use the instruction “draw yarn through the remaining stitches.” To do this, you will use a darning needle to anchor your final stitches with your loose end. After taking your hat off the needles, you can use your yarn tails to close gaps and smooth edges before you tie them off.
Below you will find both video and written guides to help you learn how to finish knit hats.
Video Guide: How to Finish Knit Hats (Bind Off & Weave in Loose Ends)
You will finish Simple Knit Beanie hats with the yarn tails as I’ve shown you in this lesson.
My Slouch Hat pattern is finished by weaving in the loose ends in the same manner.
Up Next
Next, let’s learn to make knitting increases. The “Make One” increases add stitches to your rows. Learning these stitches will allow you to shape the thumbs of gloves and more.
For the slip, slip knit decrease (ssk), you will first slip two stitches as if to knit. Insert left needle from left to right into the fronts of the two slipped stitches. Then, pull the working yarn through both stitches with the right-hand needle to knit them together.
The Slip, Slip, Knit creates a leftward-leaning decrease.
Below you will find both video and written guides to help you learn how to make slip, slip, knit decreases.
Video Guide: How to Make Slip, Slip, Knit (ssk) Decreases
Written Guides: How to Make Slip, Slip, Knit (ssk) Decreases
ssk, Step 1:
Slip two stitches knitwise with the yarn in back (sl2kwyib). To slip a stitch knitwise, hold the working yarn behind your stitches. Insert your needle into the live stitch as if to knit it (insert your right needle into the front leg of the stitch from the front to the back).
ssk, Step 2:
Do not work into a stitch that is being slipped. Instead, slide the stitch off the left needle and onto the right needle. Remember to slip two live stitches before moving on.
ssk, Step 3:
Insert your left-hand needle tip, from left to right, into the front legs of the two stitches you have just slipped onto your right-hand needle.
ssk, Step 4:
Bring the right-hand needle tip over the working yarn and begin to form a counterclockwise loop around it.
ssk, Step 5:
Pull the loop on your right-hand needle tip through the stitches on your left needle.
ssk, Step 6:
Slide the stitches you have just worked into off your left needle, allowing the new stitch to remain on your right needle. Because you have joined two stitches together, you will now have one less live stitch on your knitting needles.
To knit two together (k2tog), you will work into the front leg of two live stitches at the same time. Knitting the two stitches together will anchor them to your new live stitch.
The Knit Two Together creates a rightward-leaning decrease.
Below you will find both video and written guides to help you learn how to make Knit Two Together decreases (k2tog).
Video Guide: How Make Knit Two Together (k2tog) Decreases
Written Guides: How to Make Knit Two Together (k2tog) Decreases
k2tog, Step 1:
Insert the tip of your right-hand needle into the front legs of the first two live stitches on your left-hand needle from front to back.
k2tog, Step 2:
Bring the right needle tip over the working yarn and begin to form a counterclockwise loop around it.
k2tog, Step 3:
Pull the loop on your right needle tip through the stitches on your left needle.
k2tog, Step 4:
Slide the stitches you have just worked into off your left needle, allowing the new stitch to remain on your right needle. Because you have joined two stitches together, you will now have one less live stitch on your knitting needles.
To help shape your knitwear, you will need to know how to decrease. In knitting, decreases are a way of reducing the number of live stitches on your knitting needles. By shrinking the number of live stitches on your needles, you will be able to shrink the length of each row. When working in the round, you can use this row-shortening tactic to close the tops of your knit tubes. Adding decreases in strategic places can also create interesting patterns as you turn your tube of knitting into a fitted piece of clothing.
Two important, simple decreases are “knit two together” (k2tog) and “slip, slip, knit” (ssk). Both decreases allow you to connect two stitches while creating one new live stitch your needles. This prevents your stitches from running, while still reducing the number of stiches in your row/round.
When you knit two stitches together in evenly spaced intervals, you can create a gentle swirl effect when closing the tops of hats.
Using both the k2tog and ssk in a pattern allows you to draw two sides of your work towards each other. Strategically placing these decreases at the tips of gloves, for example, pulls the edges closer together, forming rounded fingertips.
Both the knit two together and slip, slip, knit are slanted decreases; they will lean in one direction or the other. The knit two together (k2tog) decrease will a lean rightward. The slip, slip, knit decrease will lean leftward.
Knit Two Together (k2tog) leans toward the right.
Slip, Slip, Knit (ssk) leans toward the left.
Below you will find both video and written guides to help you learn how to knit decreases.
My Slouch Hat pattern calls for k2tog decreases, as well.
In my pattern for Basic Knit Mittens you will use both ssk and k2tog decreases to make the mitten tops. The thumb-less newborn mitten size was shown in this tutorial.
When you want to change the size of your stitches between sections of a project, you can switch needle sizes. In the Magic Loop knitting method, you will work stitches off one long circular needle and onto a different long circular needle. This allows you to adjust your knitting gauge mid-project. Moving to a larger needle size will make your stitches larger, while moving to a smaller needle size will make your stitches smaller.
To switch needle sizes in the magic loop, you will replace the needle tip in your right hand with a new circular needle in another size. Then you will knit down one side of your magic loop, turn your work, and continue knitting until you have freed the old needles from your work. Then, you can continue knitting with the new sized needles.
Below you will find both video and written guides to help you learn how to switch needle sizes when you are knitting in the Magic Loop.
Video Guide: How to Switch Needle Sizes in the Magic Loop
Written Guide: How to Switch Needle Sizes in the Magic Loop
Switch Needle in Magic Loop, Step 1:
Work up to the point where the pattern instructs you to switch needle sizes. Pick up a needle in the new size with your right hand, ensuring the needle tips point toward each other.
Switch Needle in Magic Loop, Step 2:
Begin working the live stitches off the old needle size and onto the new needle size.
Switch Needle in Magic Loop, Step 3:
When you have finished working the live stitches off the first side of your magic loop, the left-hand needle tip will be free of the project.
Switch Needle in Magic Loop, Step 4:
Turn your work by rotating the entire project and pointing the needle tips toward the right. Pull the needle cord on the front side of your work leftward, to bring the front needle back into the live stitches.
Switch Needle in Magic Loop, Step 5:
Pull the back needle toward your right, moving it out of the set of stiches it was holding.
Switch Needle in Magic Loop, Step 6:
Bring the back needle around toward the front of your work, clasping it in your right hand and pointing the needle tips toward one another.
Switch Needle in Magic Loop, Step 7:
Following your pattern, work the live stitches off the right needle tip and onto the left.
Switch Needle in Magic Loop, Step 8:
When you have finished working the second half of the row/round, your old needles will be free of the work. Set the old needles aside and continue knitting on the new size needles.
You’ll knit the larger sizes in the round on circular needles and you will switch sizes mid-project.
Up Next
If you’ve been following along with my lessons, you are now ready to start shaping your knitwear. Decreases make your rows shorter, which is helpful in rounding the tops of hats and mittens. Learn how to make two simple decreases in the next lesson. (Coming 7/24/2021)
The “Magic Loop” is a knitting method that allows you to knit small tubes in the round on long circular needles. This style is a great substitute when you don’t feel like using double point needles (DPNs).
To knit in the magic loop, you will need to choose a long circular needle. Your knitting pattern will usually suggest a needle. If one is not suggested, however, a needle with a length between 29 inches (74 cm) and 36 inches (91 cm) usually works well for this technique. When I knit in the magic loop, I usually prefer to use 36-inch long circular needles (Amazon.com Affiliate Link).
When to Knit in the Magic Loop
Any time you want to knit a tube of fabric, you can use long circular needles to do so. The Magic Loop method is a great way to make smaller tubes that will not fit around your circular needles. This makes the Magic Loop a great substitute for working on double point needles. For example, working in this method can be especially useful for making small round knits like baby-sized mittens, hats, and sweater sleeves. You may even find the magic loop helpful in rounding the tops of larger hats.
Keeping Track of Rounds/Rows in the Magic Loop
When your rows connect seamlessly, they will turn into rounds. To keep track of your patterns, you will need a way to note where the rounds begin and end.
When you are working in the magic loop, you can use a stitch marker to identify where the rows end and begin. After joining the round, clip a stitch marker to the strand connecting your first and last cast on stitches. As you work each new row/round, you will need to unclip the marker and move it up to the next loop.
Watching the yarn tail can also show you where your rounds end and begin. When you cast on your knitting, you will have a tail leftover that hangs just below the final cast on stitch. Connecting the last cast on stitch to the first cast on stitch starts the next row/round, so the tail will always be located on the side of your work where the rows begin and end. If you notice this, you can work on in the magic loop without using a stitch marker.
Below you will find both video and written guides to help you learn how to knit in the round with the Magic Loop method.
Video Guide: How to Knit in the Round on in the Magic Loop
Written Guide: How to Knit in the Round on in the Magic Loop
Magic Loop, Step 1:
Using one end of the circular needle held in your right hand, cast on all of the stitches called for by your pattern; here, we will use the long-tail cast on.
Magic Loop, Step 2:
Locate the halfway point in your cast on. For example, there are 32 total cast on stitches pictured here. The halfway point will be between the two sets of 16 stitches.
Magic Loop, Step 3:
Gently bend the cord of the circular needle at the midpoint, bringing the set of stitches on the cord behind the right-hand needle. Take care not to twist the stitches around the needle; your cast on should keep a smooth edge.
Magic Loop, Step 4:
With your right hand, pinch the section of cord located just between the two sets of stitches.
Magic Loop, Step 5:
Carefully, begin pulling the cord toward the right.
Magic Loop, Step 6:
As you pull on the cord, slide the two sets of stitches onto the two ends of the circular needle.
Magic Loop, Step 7:
Take care not to twist the cast on stitches as you move them toward the needle tips. The stitches on the needle closest to you should have a smooth edge. The stitches on the needle furthest from you should have a bumpy or purl-like edge.
Magic Loop, Step 8:
Once all the stitches have been slipped onto the needles, turn your work; do this by flipping both needle tips over, so they point toward your right.
Magic Loop, Step 9:
Grasp the front needle and the live stitches with your left hand. Pull the back needle toward your right, moving it out of the set of stiches it was holding. The stitches will now be held in place by the needle cord. Take extra care not to twist the stitches during this step.
Magic Loop, Step 10:
Bring the back needle around toward the front of your work, clasping it in your right hand and pointing the needle tips toward one another. Once again, ensure that you have not twisted your cast on stitches before moving to the next step.
Magic Loop, Step 11:
Pick up the working yarn, which will be coming from the last live stitch on your cord, and wrap it on your hand in your desired knitting hold. Insert the right-hand needle tip into the first stitch on your left-hand needle tip (this is the slipknot / the first stitch you cast on).
Magic Loop, Step 12:
Work the stitch as your pattern instructs. Here, the pattern calls for a knit stitch. This will join the round, connecting the two ends of the cast on. If you wish to use a stitch marker to keep track of your rounds, clip it to the strand that connects the cast-on ends at this point.
Magic Loop,Step 13:
Following your pattern, continue working stitches off the left-hand needle tip and onto the right. When you have worked all the stitches off the left needle, you have finished half of one row/round.
Magic Loop, Step 14:
Turn your work by rotating the entire project and pointing the needle tips toward the right.
Magic Loop, Step 15:
Pull the needle cord on the frontside of your work leftward to bring the front needle back into the live stitches.
Magic Loop, Step 16:
Pull the back needle toward your right, moving it out of the set of stiches it was holding.
Magic Loop, Step 17:
Bring the back needle around toward the front of your work, clasping it in your right hand and pointing the needle tips toward one another. Following your pattern, begin working the second half of your row off the left-hand needle and onto the right.
Magic Loop, Step 18:
When you have worked all the stitches off the left needle, you have finished the row/round.
Magic Loop, Step 19:
Turn your work by rotating the entire project and pointing the needle tips toward the right. Pull the needle cord on the frontside of your work leftward to bring the front needle back into the live stitches.
Magic Loop, Step 20:
After your cast on row, and knitting one full round, your piece will be connected by a single strand of yarn.
Magic Loop, Step 21:
Repeat steps 11 through 19 for each additional row/round in your pattern.
Magic Loop, Step 22:
After working several rows/rounds, your tube-shaped piece will be connected seamlessly.
The more circular rows or “rounds” that you knit in this spiral method, the more tube-like your knit will become.
Practice With My Knitting Pattern
My Beginner Knit Ear Warmer Pattern is a great place to start learning to knit in the round. The smaller sizes are especially fun to knit in the Magic Loop.
To finish a knitted tube, such as an ear warmer or headband, you can bind off in the round on circular needles. A “standard bind off” on circular needles allows you to end your knitted work with a smooth edge. You can use any type of needle to take live stitches off circular needles (circulars, straight, or a DPN) – all you will need is one needle tip in the correct size.
Before you start, remember to loosen up:
This bind off tends to be a bit tight, so you may want to loosen up your tension when knitting this last row. Many patterns will specifically tell you to “bind off loosely,” to remind you to adjust the tightness of the stitches.
Or, go up two or three needle sizes:
Instead of adjusting how tightly you knit, you can also switch needle sizes. Try moving to a needle that is two or three sizes larger than the one you have been using for the rest of the pattern. This allows you to keep the same knitting tension in your yarn as you cast off, while still loosening the bind off stitches enough to match the rest of the piece. Some patterns instruct you to switch needle sizes for the last row, to help you ensure your ends are more even.
Below you will find both video and written guides to help you learn how to bind off on circular needles.
Video Guide: How to Bind Off in the Round on Circular Needles
Written Guide: How to Bind Off in the Round on Circular Needles
Bind Off on Circular Needles, Step 1:
Following the pattern you have been using for previous rows, knit the first two stitches of your last row.
Bind Off on Circular Needles, Step 2:
Insert the left needle tip into the front loop of the first knit stitch on your right needle from front to back.
Bind Off on Circular Needles, Step 3:
Lift the first stitch on the right needle up and over the second stitch on the right needle.
Bind Off on Circular Needles, Step 4:
Pull the second stitch on the right needle through the first stitch on the right needle.
Bind Off on Circular Needles, Step 5:
Slide the left needle out of the stitch on the right needle.
Bind Off on Circular Needles, Step 6:
At this point, the first knit stitch should be anchored onto the second and only one loop should remain on your right-hand needle.
Bind Off on Circular Needles, Step 7:
Following your pattern, work the next stitch off your left needle and onto the right needle.
Bind Off on Circular Needles, Step 8:
In the same manner as before, lift the first stitch on your right-hand needle over the second stitch, drawing the second stitch through the first, leaving only one stitch on your right-hand needle.
Bind Off on Circular Needles, Step 9:
Repeat steps seven and eight until you have reached the last two stitches and freed the left-hand needle from your work.
Bind Off on Circular Needles, Step 10:
Lift the first stitch on the right needle over the second, leaving only one stitch on your right-hand needle.
Bind Off on Circular Needles, Step 11:
Set your work down, leaving the knitting needle in the last stitch. With very sharp scissors, clip the working yarn about eight or ten inches away from your last stitch. This will free your work from the ball of yarn.
Bind Off on Circular Needles, Step 12:
Pull the yarn tail through to anchor it in; do this by enlarging the last stitch with your knitting needle until the tail slides completely through. The loop will become a straight loose end.
You’ll knit the larger sizes in the round on circular needles, so you can practice this standard bind off.
Up Next
The “Magic Loop” is a knitting method that allows you to knit small tubes in the round on long circular needles. This style is a great substitute when you don’t feel like using double point needles (DPNs). Find out how to knit in the magic loop with the next lesson.
